Materials

We work from an extensive selection of materials to machine your ideal prototype or part. Reference the chart below for a spec list of commonly used materials.

Our most frequently requested machined plastics include: ABS, Radel, Polycarbonate, Acrylic, PC/ABS, Teflon, Noryl, Nylon, PEEK, Acetal, Ultem and foam. Most machinable plastics are available in different colors, some with different fillers including glass and carbon, among others.

Our most frequently requested machined alloys include aluminum, magnesium, copper, steel, stainless steel, and brass.

Call us at 855-457-0560 to discuss your service requirements and receive a quote.

Select a material type and click on Apply to see results
Title Density (lbs/in³) Flexural Modulus (psi) Hardness Rockwell IZOD Impact (ft-lb/in) Tensile Elongation at Break Tensile Strength (psi) Thermal Conductivity (BTU-in/ft²*hr*F)
ABS 0.04 340,000 R105 7.70 25% 6,100 1.73
Acetal 0.51 375,000 M80 1.50 75% 8,800 1.60
Acrylic 0.04 350,000 M80 0.30 2% 8,000 3.90
Aluminum 0.10 30 40 240.00 12% 40,000 1,160.00
Celazole 0.05 95,000 E105 0.50 3% 23,000 2.80
Duratron 0.05 600,000 E80 2.00 10% 20,000 1.80
Ertalyte 0.05 490,000 M93 0.50 20% 12,400 2.00
G-10 0.07 2,700 M110 14.00 45,000 2.00
Hydex 0.05 420,000 R120 1.00 50% 9,400
Magnesium 0.06 2% 3,050 1,100.00
Noryl 0.04 360,000 R119 5.00 30% 9,600 1.32
Nylon 0.04 500,000 R115 0.40 20% 12,000 1.67
PC/ABS 0.04 270,000 R110 2.30 4% 5,040
PEEK 0.05 600,000 M100 1.00 20% 16,000 175.00
Polycarbonate 0.04 375,000 M70 13.00 60% 9,500 1.35
Radel 0.05 345,000 M80 2.50 30% 11,000 2.40
Ryton 0.06 1,000,000 M94 1.00 2% 13,000 2.10
Stainless Steel
Teflon PTFE 0.08 72,000 3.50 300% 3,900 1.70
Torlon 0.06 900,000 E85 0.70 3% 15,000 2.50
UHMW 0.04 140,000 390% 5,600
Ultem 0.05 500,000 M112 0.50 80% 16,500 0.85
Vespel 0.05 450,000 E45-60 0.80 8% 12,500 2.00